| |
| 12-03 CARBURETORS |
|
12-03A REBUILT OEM CARBURETORS MADE IN THE USA |
| |
| NOTE: Our factory rebuilt carburetors are shipped with all of the original carburetor linkage to include the throttle shaft, the throttle rod, the choke link and the operating lever. Connections from your old throttle and choke are not included as these parts will vary depending on the installation. Some Jerry Rigging should be expected. |
|
| |
CARTER CARBURETORS FOR THE L-4-134 FLAT HEAD 4 CYLINDER ENGINE
|
| |
| PREFIX |
PART NO. |
DESCRIPTION |
APPLICATION |
PRICE |
| R/B |
641123
WA-1
613 S
|
CARBURETOR, CARTER MODEL WA-1, CARTER No. 613 S, 2 3/8" CENTER TO CENTER ON BASE MOUNTING STUDS, FOR USE WITH INTAKE MANIFOLD 641084 OR 641095.
|
4-63 VJ/SW/SD/PU
|
$ 375.00*
|
| R/B |
647744
W-O
636 SA
|
CARBURETOR, CARTER MODEL W-O, CARTER No. 636 SA, 2 3/8" CENTER TO CENTER ON BASE MOUNTING STUDS. THIS CARBURETOR REQUIRES THE BASE GASKET/DIFFUSER A-6357 LISTED BELOW.
|
MB/GPW CJ-2A/3A 2WD/4WD PU
|
$ 375.00*
|
| R/B |
A-17854
YS 637 S
|
CARBURETOR, CARTER MODEL YS 637 S, WATERPROOF, 2 3/8" CENTER TO CENTER ON BASE MOUNTING STUDS.
*CORE REQUIRED ON THIS CARBURETOR BEFORE WE SHIP*
|
M38
|
$ 375.00*
|
| R/B |
1904-F |
CARBURETOR, HOLLEY MODEL 1904-F, SINGLE BARREL, 2 3/4" CENTER TO CENTER ON BASE MOUNTING STUDS,THIS CARBURETOR WAS A POPULAR UPGRADE WHEN THE F-4-134 ENGINE WAS USED ON THE MB/GPW/CJ-2A/CJ-3A AND DJ-3A. THIS LOW PROFILE CARBURETOR WILL FIT UNDER THE HOOD WITHOUT CUTTING A HOLE.
*CORE REQUIRED ON THIS CARBURETOR BEFORE WE SHIP*
|
ALL F-4-134 ENGINES.
|
$ 395.00*
|
| R/B |
909963
YF 2392 S
|
CARBURETOR, CARTER MODEL YF 2392-S, 2 3/4" CENTER TO CENTER ON BASE MOUNTING STUDS.
*CORE REQUIRED ON THIS CARBURETOR BEFORE WE SHIP*
|
DJ-3A
|
$ 475.00*
|
|
| |
 |
641123/WA-1/613 S
|
$ 375.00 |
|
 |
647744/W-O/636 SA
|
$ 375.00 |
|
|
| |
 |
| A-17854/YS 637 S |
$ 375.00 |
|
 |
909963/YF 2392 S
|
$ 475.00
|
|
|
| |
|
* CORE REQUIRED ON THESE CARBURETORS *
|
| |
| |
CARTER CARBURETORS FOR THE F-4-134 OVERHEAD VALVE ENGINE
|
| |
| PREFIX |
PART NO. |
DESCRIPTION |
APPLICATION |
PRICE |
| R/B |
804826
YS 950 S
|
CARBURETOR , CARTER MODEL YS 950 S, WATERPROOF, 2 3/4" CENTER TO CENTER ON BASE MOUNTING STUDS.
*CORE REQUIRED ON THIS CARBURETOR BEFORE WE SHIP*
|
M38A1 |
$ 375.00* |
| R/B |
648678
YF 738 S
|
CARBURETOR , CARTER MODEL YF 738 S, 2 3/4" CENTER TO CENTER ON BASE MOUNTING STUDS.
|
4-63 VJ/SW/SD
|
$ 375.00* |
| R/B |
649571
YF 768 S
|
CARBURETOR , CARTER MODEL YF 768 S, 2 3/4" CENTER TO CENTER ON BASE MOUNTING STUDS.
|
4-73 VJ/SW/SD PU |
$ 375.00* |
| R/B |
YF 787 SA
|
CARBURETOR, CARTER MODEL YF 787 SA, 2 3/4" CENTER TO CENTER ON BASE MOUNTING STUDS.
|
VARIOUS VEHICLES
|
$ 375.00* |
| R/B |
YF 820 SB
|
CARBURETOR, CARTER MODEL YF 820 SB, 2 3/4" CENTER TO CENTER ON BASE MOUNTING STUDS.
|
VARIOUS VEHICLES
|
$ 375.00* |
| R/B |
802225
923807
YF 832 SA
|
CARBURETOR, CARTER MODEL YF 832 SA, 2 3/4" CENTER TO CENTER ON BASE MOUNTING STUDS.
|
4-73 VJ/SW/SD PU
|
$ 375.00* |
| R/B |
802225
YF 832 SB
|
CARBURETOR, CARTER MODEL YF 832 SB, 2 3/4" CENTER TO CENTER ON BASE MOUNTING STUDS.
|
4-73 VJ/SW/SD PU
|
$ 375.00* |
| R/B |
806305
YF 938 SA
|
CARBURETOR, CARTER MODEL YF 938 SA, 2 3/4" CENTER TO CENTER ON BASE MOUNTING STUDS, WITH "V" TYPE THROAT.
|
CJ-3B/5/6 FC-150
|
$ 375.00* |
| R/B |
920337
YF 938 SC
|
CARBURETOR, CARTER MODEL YF 938 SC, 2 3/4" CENTER TO CENTER ON BASE MOUNTING STUDS, WITH "V" TYPE THROAT.
|
CJ-3B/5/6 FC-150
|
$ 375.00* |
| R/B |
923808
YF 938 SD |
CARBURETOR, CARTER MODEL YF 938 SD, 2 3/4" CENTER TO CENTER ON BASE MOUNTING STUDS.
|
CJ-3B/5/6 FC-150
|
$ 375.00* |
| R/B |
805493
YF 951 S
|
CARBURETOR, CARTER MODEL YF 951 S, 2 3/4" CENTER TO CENTER ON BASE MOUNTING STUDS.
|
4-73 VJ/SW/SD/PU
|
$ 375.00* |
| R/B |
923978
YF 951 SA
|
CARBURETOR, CARTER MODEL YF 951 SA, 2 3/4" CENTER TO CENTER ON BASE MOUNTING STUDS.
|
4-75 VJ/SW/SD/PU
|
$ 375.00* |
| R/B |
YF 964 S
|
CARBURETOR, CARTER MODEL YF 964 S, 2 3/4" CENTER TO CENTER ON BASE MOUNTING STUDS, WITH "V" TYPE THROAT.
|
VARIOUS VEHICLES
|
$ 375.00* |
| R/B |
YF 3200 S
|
CARBURETOR, CARTER MODEL YF 3200 S, 2 3/4" CENTER TO CENTER ON BASE MOUNTING STUDS, WITH "V" TYPE THROAT.
|
CJ-3B/5/6 FC-150
|
$ 375.00* |
| R/B |
943193
YF 4002 S
|
CARBURETOR, CARTER MODEL YF 4002 S, 2 3/4" CENTER TO CENTER ON BASE MOUNTING STUDS, WITH "V" TYPE THROAT.
|
CJ-3B/5/6 FC-150
|
$ 375.00* |
| R/B |
1904-F |
CARBURETOR, HOLLEY MODEL 1904-F, SINGLE BARREL, 2 3/4" CENTER TO CENTER ON BASE MOUNTING STUDS,THIS CARBURETOR WAS A POPULAR UPGRADE WHEN THE F-4-134 ENGINE WAS USED ON THE MB/GPW/CJ-2A/CJ-3A AND DJ-3A. THIS LOW PROFILE CARBURETOR WILL FIT UNDER THE HOOD WITHOUT CUTTING A HOLE.
*CORE REQUIRED ON THIS CARBURETOR BEFORE WE SHIP*
|
ALL F-4-134 ENGINES.
|
$ 395.00*
|
| R/B |
WE627 S |
CARBURETOR, CARTER MODEL WE-627S
This carburetor was a popular performance upgrade for the F-4-134 engine in the sixties. It was originally used on Studebaker cars from the thirties and forties with six cylinder engines. With the increased fuel delivery and the Carter Climatic Control automatic/hand adjustable choke on this carburetor, add a new set of Hooker headers and you had a really souped-up Jeep in those days. This carburetor bolts right up to any F-4-134 engine as it is 2 3/4" center to center on the base mounting studs. Some "Jerry-Rigging" of the throttle linkage is to be expected.
|
ALL F-4-134 ENGINES
|
$ 475.00* |
|
| |
|
|
| 804826/YS 950 S |
$375.00* |
|
|
|
| 649571/YF 768 S |
$ 375.00* |
|
|
|
| |
|
|
| |
YF 787 SA |
$ 375.00*
|
|
|
YF 820 SB |
$ 375.00*
|
|
|
| |
|
|
| |
802225/YF 832 SA |
$ 375.00*
|
|
|
806305/YF 938 SA |
$ 375.00*
|
|
|
| |
|
|
| 923808/YF 938 SD |
$ 375.00* |
|
|
|
| 805493/YF 951 S |
$ 375.00* |
|
|
| |
|
|
| YF 964 S |
$ 375.00* |
|
|
|
| YF 3200 S |
$ 375.00* |
|
|
|
| |
|
|
| 943193/YF 4002 S |
$ 375.00* |
|
|
|
WE 627 S
|
$475.00* |
|
|
|
| |
| |
|
* CORE REQUIRED ON THESE CARBURETORS *
|
| |
|
NOTE- WE CAN REBUILD ANY WILLYS CARBURETOR
|
|
NOTE- A REFUNDABLE CORE CHARGE WILL BE APPLIED TO THESE CARBURETORS
|
| |
CARBURETORS FOR THE STRAIGHT SIX CYLINDER ENGINES
|
| |
| PREFIX |
PART NO. |
DESCRIPTION |
APPLICATION |
PRICE |
| R/B |
805203
YF 924 S
|
CARBURETOR , CARTER MODEL YF-924 S, SINGLE BARREL,2 3/4" CENTER TO CENTER ON BASE MOUNTING STUDS.
|
VJ/SW/SD WITH 6-161 ENGINE
|
$ 375.00* |
| R/B |
923810
YF 2467 S
|
CARBURETOR , CARTER MODEL YF-2467 S, SINGLE BARREL, 3" CENTER TO CENTER ON BASE MOUNTING STUDS.
|
SW/SD/PU FC-170 WITH L-6-226 ENGINE
|
$ 375.00* |
| R/B |
923809
WCD 2204 S
|
CARBURETOR , CARTER MODEL WCD-2204 S, DUAL THROAT TYPE, WITH THE CARTER CLIMATIC CONTROL AUTOMATIC/HAND ADJUSTABLE CHOKE, USES FOUR MOUNTING STUDS.
|
SW/SD/PU FC-170 WITH L-6-226 ENGINE
|
$ 375.00* |
|
| |
|
|
|
|
| 805203/YF 924 S |
$ 375.00 |
|
923810/YF 2467 S |
$ 375.00 |
|
|
| |
|
| 923809/WCD 2204 S |
$ 375.00 |
|
| |
|
* CORE REQUIRED ON THESE CARBURETORS BEFORE WE SHIP*
|
| |
| CARBURETORS FOR THE V6-225 ENGINE |
| |
| PREFIX |
PART NO. |
DESCRIPTION |
APPLICATION |
PRICE |
| R/B |
7016507
|
CARBURETOR , ROCHESTER MODEL (21-103), SINGLE BARREL.
|
LATE CJ-5/6 WITH THE V6-225 ENGINE
|
$ 375.00* |
| R/B |
941343
|
CARBURETOR , ROCHESTER MODEL (2G), TWO BARREL.
|
LATE CJ-5/6 WITH THE V6-225 ENGINE
|
$ 375.00* |
|
| |
 |
| 7016507 |
$ 375.00
|
|
 |
| 941343 |
$ 375.00 |
|
|
| |
|
* CORE REQUIRED ON THESE CARBURETORS BEFORE WE SHIP *
|
| |
| CARBURETOR FOR THE OHC-6-230 ENGINE |
| |
| PREFIX |
PART NO. |
DESCRIPTION |
APPLICATION |
PRICE |
| R/B |
926091 |
CARBURETOR , HOLLEY MODEL R-2415-A, 2382-B, 2 BARREL.
|
WILLYS SW/SD/PU WITH OHC-6-230 ENGINE
|
$ 475.00* |
| R/B |
933170 |
CARBURETOR , HOLLEY MODEL R-2640, 2300-C, 2 BARREL.
|
SW/SD/PU J-SERIES WITH OHC-6-230 ENGINE
|
$ 375.00* |
|
| |
 |
| 926091 |
$ 475.00* |
|
 |
| 933170 |
$ 375.00
|
|
|
|
| |
|
* CORE REQUIRED ON THIS CARBURETOR BEFORE WE SHIP *
|
| |
CARBURETOR FOR THE M422 "MIGHTY-MITE"
|
| |
| PREFIX |
PART NO. |
DESCRIPTION |
APPLICATION |
PRICE |
| R/B |
1904-F R/B
|
FSN: 2910-724-3195. CARBURETOR , HOLLEY MODEL 1904-F, SINGLE BARREL, 2 3/4" CENTER TO CENTER ON BASE MOUNTING STUDS, THIS CARBURETOR WAS A POPULAR UPGRADE WHEN THE F-4-134 ENGINE WAS USED ON THE MB/GPW/CJ-2A/CJ-3A AND DJ-3A. THIS LOW PROFILE CARBURETOR WILL FIT UNDER THE HOOD WITHOUT CUTTING A HOLE.
|
M422 M422A1
|
$ 395.00* |
|
| |
 |
| 1904-F |
$ 395.00* |
|
| |
|
* CORE REQUIRED ON THIS CARBURETOR BEFORE WE SHIP *
|
| |
| |
| CARBURETORS FOR THE M151 "MUTT" |
| |
| PREFIX |
PART NO. |
DESCRIPTION |
APPLICATION |
PRICE |
| R/B |
5703316 10939511 R/B
|
CARBURETOR, ZENITH MODEL 12848, SINGLE BARREL, SIDE DRAFT, FSN: 2910-878-8839.
|
M151 M151A1
|
$ 375.00* |
| R/B |
5704524 11681709 R/B
|
CARBURETOR, ZENITH MODEL 13660B, SINGLE BARREL, SIDE DRAFT, NSN: 2910-01-157-4175.
|
M151A2
|
$ 375.00* |
|
| |
 |
| 5703316 |
$ 375.00* |
|
 |
| 5704524 |
$ 375.00* |
|
|
| |
|
* CORE REQUIRED ON THESE CARBURETORS BEFORE WE SHIP *
|
| |
| 12-03B NEW REPLACEMENT CARBURETORS |
| |
| PREFIX |
PART NO. |
DESCRIPTION |
APPLICATION |
PRICE |
| RPL |
647744-R
|
CARBURETOR KIT, CARTER MODEL W-O, FOR USE WITH THE L-4-134 ENGINE, 2 3/8" CENTER TO CENTER ON BASE MOUNTING STUDS, INCLUDES THE BASE GASKET/DIFFUSER A-6357, THE CORRECT MOUNTING STUDS AND NUTS AND THE BRASS FUEL INLET PORT ELBOW.
| *Note- |
This is the finest replacement W-O carburetor that we have ever seen. It is an exact copy of the original Carter carburetor in every detail.
|
|
MB/GPW CJ-2A/3A/M38 L-4-134 PU
|
$ 392.50*
|
|
| |
 |
| 647744-R |
$ 392.50 |
|
| |
| * CORE REQUIRED ON THIS CARBURETOR * |
| |
| |
| PREFIX |
PART NO. |
DESCRIPTION |
APPLICATION |
PRICE |
| RPL |
923806-S
|
CARBURETOR, SOLEX W-O M32 PBIC FOR USE WITH THE L-4-134 ENGINE, 2 3/8" CENTER TO CENTER ON THE BASE MOUNTING STUDS.
| *Note- |
The air horn can be removed from this carburetor for use with a dry type aftermarket air cleaner. |
|
|
THIS CARBURETOR REQUIRES A FUEL PRESSURE REGULATOR BETWEEN THE FUEL PUMP AND CARBURETOR SET TO 1 3/4 AND 2 PSI. SEE OUR KIT #9710 BELOW. |
|
MB/GPW CJ-2A/3A M38 L-4-134 PU
|
$ 179.50
|
|
| |
|
* NO CORE REQUIRED ON THIS CARBURETOR *
|
| |
 |
| 923806-S |
$ 179.50 |
|
| |
| NOTE- |
AN INLINE FUEL PRESSURE REGULATOR IS REQUIRED FOR USE WITH THE SOLEX CARBURETORS. THE FUEL PRESSURE REGULATOR MUST BE MOUNTED BETWEEN THE FUEL PUMP AND THE CARBURETOR AND SET TO A LOW SETTING: 1 3/4 TO 2 PSI. THIS FUEL PRESSURE REGULATOR IS SHOWN BELOW IN SUBGROUP 12-03F.
|
|
| |
| |
| PREFIX |
PART NO. |
DESCRIPTION |
APPLICATION |
PRICE |
| RPL |
923808-S
|
CARBURETOR, SOLEX YF M34 PBIC, FOR USE WITH THE F-4-134 ENGINE, 2 3/4" CENTER TO CENTER ON THE BASE MOUNTING STUDS.
| *Note- |
The "V" adapter on the air horn can be removed from this carburetor for use with a dry type aftermarket air cleaner. |
| *Note- |
THIS CARBURETOR REQUIRES A FUEL PRESSURE REGULATOR BETWEEN THE FUEL PUMP AND CARBURETOR SET TO 1 3/4 AND 2 PSI. SEE OUR KIT #9710 BELOW. |
|
CJ-3B/5/6 VJ/SW/SD M38A1 F-4-134 PU FC-150/DJ-3A
|
$ 169.50
|
|
| |
|
* NO CORE REQUIRED ON THIS CARBURETOR *
|
| |
 |
| 923808-S |
$ 169.50 |
|
| |
| NOTE- |
AN INLINE FUEL PRESSURE REGULATOR IS REQUIRED FOR USE WITH THE SOLEX CARBURETORS. THE FUEL PRESSURE REGULATOR MUST BE MOUNTED BETWEEN THE FUEL PUMP AND THE CARBURETOR AND SET TO A LOW SETTING: 1 3/4 TO 2 PSI. THIS FUEL PRESSURE REGULATOR IS SHOWN BELOW IN SUBGROUP 12-03F. |
|
| |
| 12-03C CARBURETOR ATTACHING PARTS |
| |
| PREFIX |
PART NO. |
DESCRIPTION |
APPLICATION |
PRICE |
| OEM |
A-923 |
GASKET INSULATOR, CARBURETOR TO INTAKE MANIFOLD, 2 3/8" CENTER TO CENTER ON BASE MOUNTING STUDS.
|
ALL L-4-134 ENGINES |
$ 3.75 |
| RPL |
A-6357-R |
GASKET AND DIFFUSER, CARBURETOR
TO INTAKE MANIFOLD, 2 3/8" CENTER TO CENTER ON BASE MOUNTING STUDS.
|
ALL L-4-134 ENGINES WITH W-O CARBURETOR |
$ 19.50 |
| OEM |
648970 |
GASKET, CARBURETOR TO
CYLINDER HEAD, 2 3/4" CENTER TO CENTER ON BASE MOUNTING STUDS.
|
ALL F-4-134 ENGINES |
$ 3.50 |
| NOS |
910844 NOS
|
INSULATOR, CARBURETOR FLANGE TO INTAKE MANIFOLD.
|
ALL L-6-226 ENGINES WITH SINGLE BARREL CARB
|
$ 68.50
|
| T/O |
910844
|
INSULATOR, CARBURETOR FLANGE TO INTAKE MANIFOLD.
|
ALL L-6-226 ENGINES WITH SINGLE BARREL CARB
|
$ 45.00
|
| OEM |
910843 |
GASKET, CARBURETOR FLANGE TO INTAKE MANIFOLD, 2 7/8" CENTER TO CENTER ON BASE MOUNTING STUDS, 2 REQD.
|
ALL L-6-226 ENGINES WITH SINGLE BARREL CARB |
$ 3.50 EA.
|
| OEM |
632159-K |
STUD KIT, CARBURETOR TO INTAKE
MANIFOLD.
|
ALL L-4-134 ENGINES |
$ 5.50 |
| OEM |
103195-K |
STUD KIT, CARBURETOR TO CYLINDER
HEAD.
|
ALL F-4-134 ENGINES |
$ 5.50 |
| OEM |
A-564-K |
STUD KIT, CARBURETOR TO INTAKE
MANIFOLD.
|
ALL L-6-226 ENGINES |
$ 5.50 |
| OEM |
384569 |
ELBOW, CARBURETOR INLET PORT.
|
ALL VEHICLES
|
$ 3.75 |
| OEM |
38810 |
NIPPLE, CARBURETOR INLET PORT, USED WITH BULK 3/8" I.D. FUEL HOSE.
|
ALL VEHICLES
|
$ 3.75 |
|
| |
|
|
| |
A-923 |
$ 3.75
|
|
|
A-6357-R |
$ 19.50
|
|
|
| |
|
|
| |
A-6357-R |
$ 3.50
|
|
|
910844-NOS |
$ 68.50
|
|
|
| |
|
|
| 910843 |
$ 3.50 |
|
|
|
| 632159-K |
$ 5.50
|
|
|
| |
|
|
| 103195-K |
$ 5.50 |
|
|
|
| A-564-K |
$ 5.50 |
|
|
| |
 |
| 384569 |
$ 3.75 |
|
 |
| 38810 |
$ 3.75 |
|
|
| |
| 12-03D CARBURETOR REPAIR KITS |
| |
|
OEM HYGRADE PERFORMANCE CARBURETOR REPAIR KITS |
| |
| PREFIX |
PART NO. |
DESCRIPTION |
APPLICATION |
PRICE |
| OEM |
647745 |
HYGRADE PERFORMANCE CARBURETOR REPAIR KIT,
CARTER MODEL W-O, CARBURETOR NUMBERS: 450 / 507 / 539 / 572 / 596 / 636 / 698 / 897 / 933 / 936 / 984.
|
ALL L-4-134 ENGINES WITH 1 BARREL CARBURETOR.
|
$ 44.50 |
| OEM |
923800 |
HYGRADE PERFORMANCE CARBURETOR REPAIR KIT,
CARTER MODEL YF, CARBURETOR NUMBERS: 738 / 768 / 820 / 832 / 938 / 951 / 2392 / 3200 / 4210.
|
ALL F-4-134 ENGINES WITH 1 BARREL CARBURETOR. |
$ 38.50 |
| OEM |
940772 |
HYGRADE PERFORMANCE CARBURETOR REPAIR KIT,
CARTER MODEL YF, CARBURETOR NUMBERS: 4002 / 4366 / 4941 / 6511 / 6211 / 6291.
|
ALL F-4-134 ENGINES WITH 1 BARREL CARBURETOR. |
$ 29.50 |
| OEM |
917221 |
HYGRADE PERFORMANCE CARBURETOR REPAIR KIT,
CARTER MODEL YF, CARBURETOR NUMBERS: 814 / 833 / 924 / 937 / 2071 / 2756.
|
ALL L-6-161 AND F-6-161 ENGINES WITH 1 BARREL CARBURETOR. |
$ 38.50 |
| OEM |
923810 |
HYGRADE PERFORMANCE CARBURETOR REPAIR KIT,
CARTER MODEL YF, CARBURETOR NUMBER: 2467.
|
ALL L-6-226 ENGINES WITH 1 BARREL CARBURETOR. |
$ 28.50 |
| OEM |
939006 |
HYGRADE PERFORMANCE CARBURETOR REPAIR KIT,
HOLLY MODEL 1920, CARBURETOR NUMBERS: R 2647-1 / R 2651-1
|
ALL OHC-6-230 ENGINES
WITH 1 BARREL CARBURETOR. |
$ 33.50 |
| OEM |
933616 |
HYGRADE PERFORMANCE CARBURETOR REPAIR KIT,
HOLLY MODEL 2415, CARBURETOR NUMBERS: R 2451 / R 2640 / R 2930.
|
ALL OHC-6-230 ENGINES
WITH 2 BARREL CARBURETOR. |
$ 37.50 |
| OEM |
7016448 |
HYGRADE PERFORMANCE CARBURETOR REPAIR KIT,
ROCHESTER MODEL, CARBURETOR NUMBERS: 7016507 / 7025149.
|
ALL V6-225 ENGINES WITH 1 BARREL CARBURETOR. |
$ 37.50 |
| OEM |
7016632 |
HYGRADE PERFORMANCE CARBURETOR REPAIR KIT,
ROCHESTER MODEL, CARBURETOR NUMBERS: 7026082/086/089, 7027082/089, 7027041, 7036144, 7041185/186.
|
ALL V6-225 ENGINES WITH 2 BARREL CARBURETOR. |
$ 38.50 |
|
| |
|
|
TYPICAL HYGRADE OPERFORMANCE CARBURETOR REPAIR KIT.
|
|
|
| |
|
HYGRADE performance carburetor repair kits are without a doubt the top of the line in carburetor repair kits. All HYGRADE kits contain detailed service instructions in ENGLISH. The instructions include exploded view drawings of all the carburetor components, step by step disassembly, assembly, adjustment guides and adjustment gauges. All HYGRADE kits are made in the U.S.A.
|
|
| |
|
NOS CARBURETOR REPAIR KITS |
| |
| PREFIX |
PART NO. |
DESCRIPTION |
APPLICATION |
PRICE |
| NOS |
939847 NOS |
CARBURETOR GASKET, ASSORTMENT, CARTER No. 206A.
|
ALL F-4-134 ENGINES |
$ 28.50 |
| NOS |
938015 NOS |
CARBURETOR ACCELERATOR PUMP DISCHARGE BALL CHECK KIT, CARTER No. 116-27U.
|
ALL F-4-134 ENGINES |
$ 28.50 |
| NOS |
923801 NOS |
CARBURETOR GASKET ASSORTMENT, CARTER No. 258.
|
ALL L-6-226 ENGINES WITH 2 BARREL CARBURETOR
|
$ 48.50 |
| NOS |
939008 NOS |
CARBURETOR "PEP" KIT, MAJOR, FOR USE WITH WITH 1 BARREL CARBURETOR.
|
ALL OHC-6-230 ENGINES
|
$ 48.50 |
|
| |
|
|
| |
939847-NOS |
$ 28.50
|
|
|
938015-NOS |
$ 28.50
|
|
|
| |
|
|
| |
923801-NOS |
$ 48.50
|
|
|
939008-NOS |
$ 48.50
|
|
|
| |
| |
| REPLACEMENT CARBURETOR REPAIR KITS |
| PREFIX |
PART NO. |
DESCRIPTION |
APPLICATION |
PRICE |
| RPL |
647745-MKR |
MASTER CARBURETOR REPAIR KIT, CARTER MODEL W-O.
|
ALL L-4-134 ENGINES |
$ 54.50
|
| RPL |
SK 13 |
CARBURETOR REPAIR KIT,
SOLEX MODEL W-O.
|
ALL L-4-134 ENGINES WITH SOLEX W-O CARBURATOR
|
$ 49.50 |
| RPL |
SK 5 |
CARBURETOR REPAIR KIT,
SOLEX MODEL YF.
|
ALL F-4-134 ENGINES WITH SOLEX YF CARBURATOR
|
$ 54.50
|
| RPL |
648065 |
CARBURETOR REPAIR KIT CARTER MODEL YS.
|
M38 |
$ 54.50 |
| RPL |
807885 |
CARBURETOR REPAIR KIT CARTER MODEL YS.
|
M38A1 |
$ 49.50 |
|
| |
|
|
| |
647745-MKR |
$ 54.50
|
|
|
SK-13 |
$ 49.50
|
|
|
| |
|
|
| SK-5 |
$ 54.50 |
|
|
|
| 648065 |
$ 54.50 |
|
|
| |
|
| 807885 |
$ 49.50 |
|
| |
| |
12-03E CARBURETOR FLOATS
|
| |
| PREFIX |
PART NO. |
DESCRIPTION |
APPLICATION |
PRICE |
| OEM |
FL-11 |
FLOAT AND HINGE ASSEMBLY.
|
ALL OHC-6-230 ENGINES WITH HOLLEY 2 BARREL CARBURETORS #R-2415 |
$ 16.50 |
| OEM |
FL-100 |
FLOAT AND HINGE ASSEMBLY.
|
ALL V-6-225 ENGINES WITH HOLLEY 2 BARREL CARBURETORS #7026082, 7026086 AND 7027082. |
$ 19.50 |
|
| |
 |
| FL-11 |
$ 16.50 |
|
 |
| FL-100 |
$ 19.50 |
|
|
| |
| 12-03F CARBURETOR FUEL PRESSURE REGULATOR |
| |
| PREFIX |
PART NO. |
DESCRIPTION |
APPLICATION |
PRICE |
| OEM |
9710 |
KIT, FUEL PRESSURE REGULATOR, MOUNTS ON INLET PORT OF CARBURETOR, 0 TO 5.5 PSI
|
ALL VEHICLES |
$ 72.50 |
|
| |
 |
| 9710 |
$ 72.50 |
|
| |
| |
12-03G CARBURETOR SCREWS
|
| |
| PREFIX |
PART NO. |
DESCRIPTION |
APPLICATION |
PRICE |
| OEM |
116213 117122
|
SCREW, TOP COVER, (AIR HORN), 1/2" LONG.
|
CARTER WA-1/W-0 CARBS
|
$ 0.75 EA
|
| OEM |
116215 116769
|
SCREW, FLANGE TO BODY.
|
ALL CARBS
|
$ 0.75 EA
|
| OEM |
1116892
|
SCREW, TOP COVER, (AIR HORN) 5/8" LONG.
|
ALL CARBS
|
$ 0.75 EA
|
| OEM |
116851
|
SCREW, TOP COVER, (AIR HORN) 3/4" LONG.
|
ALL CARBS
|
$ 0.75 EA
|
|
| |
Product Search
