This complete engine oil filter assembly can be installed on all F-4-134 overhead valve engines. This assembly includes a new Fram PB50 spin-on throw-away filter, the oil filter mounting bracket on the cylinder head, the two cylinder head bolts, four cylinder head nuts and washers for use with cylinder head studs, an oil inlet hose and the oil outlet hose. The spin-on oil filter base with the jam nut and two brass hose fittings attach to the spin-on mounting bracket and the brass fitting on the side of the block are included.

This oil filter assembly can be installed on the CJ-3B/CJ-5/CJ-6/M38A1 and all VJ Jeepsters, the FC-150 Truck, Utility Wagons and the Utility Trucks with the overhead valve F-4-134 engine.

FILTER, OIL ASSEMBLY, SPIN-ON, THROW-AWAY TYPE, FRAM USA BRAND.

BRACKET, SPIN-ON OIL FILTER ASSEMBLY, THIS IS OUR HEAVY DUTY REPLACEMENT, IT WILL NEVER CRACK LIKE THE ORIGINALS! MADE IN THE USA BY WJP.

*NOTE-THIS BRACKET IS ONLY SOLD AS PART OF THE COMPLETE OIL FILTER KIT.

MOUNTING KIT, OIL FILTER BRACKET TO CYLINDER HEAD, INCLUDES HEAD BOLTS, HEAD STUD NUTS AND FLATWASHERS, GRADE 8 , YELLOW ZINC PLATED.

BASE, SPIN-ON OIL FILTER, CAST ALUMINUM, FRAM TYPE.

JAM NUT, SPECIAL, OIL FILTER BASE TO OIL FILTER BRACKET, THIN HEX, BLACK OXIDE STEEL, INCLUDES A STAINLESS STEEEL LOCK WASHER.

OIL HOSE, INLET, 12 1/2" LONG WITH TWO MALE FLARED TUBE SWIVEL FITTINGS.

OIL HOSE, INLET, 12 1/2" LONG WITH TWO MALE FLARED TUBE SWIVEL FITTINGS.

ELBOW, 90° BRASS, OIL FILTER INLET HOSE AT LEFT SIDE OF THE ENGINE BLOCK IN FRONT OF THE FUEL PUMP.

CONNECTOR, STRAIGHT, BRASS, OIL INLET, USED AT THE OFF-SET HOLE ON THE OIL FILTER BASE

CONNECTOR, STRAIGHT, BRASS, OIL OUTLET, USED AT THE CENTER HOLE OF THE OIL FILTER BASE

CLIP AND LOOM, OIL INLET LINE TO FRONT ENGINE PLATE, INCLUDES THE PROTECTIVE CLOTH LOOM, 1/2" DIA. WITH 3/8" BOLT HOLE.